Legal Removal Request

Post: Hello hwissing I tried setting up a new raspbian image and after running through the steps in our owfs tutorial my Raspberry Pi was showing duplicates for each 1 wire device so it appears to be a problem with either the most recent version of Raspbian Linux or owfs. I have found a possible fix that works on my Raspberry Pi and may work for you. First, you have to disable 1 Wire in raspi-config under Interfacing Options > P8 1 Wire. Next, add the ds2482 module into /etc/modules [pre][code]sudo nano /etc/modules[/code][/pre] Add the following to the bottom of the text file: [pre][code]ds2482[/code][/pre] Save and reboot your Raspberry Pi. Once rebooted owfs should still work but you will still find duplicate devices in the /mnt/1wire folder. To make it only show one version of each device you need to run the following command. [pre][code]sudo owfs --w1[/code][/pre] After running that command the duplicates should disappear and the remaining devices should work correctly. You can make the change permanent by adding "owfs --w1" to /etc/rc.local before the last line "exit 0". At the moment I am not sure why running the owfs --w1 command removes the duplicates but I will do a bit more research and once I understand the problem I will update our owfs tutorial.