Legal Removal Request

Post: A quick update on the Banana BPI M2 Zero. I couldn't get the SPI bus working under Ubuntu but so I decided to try the Raspbian OS image. The I2C bus is on port 0 instead of 1 as it was with Ubuntu and SPI only has one port SPI0.0 so it will not work correctly with our ADC DAC Pi or Expander Pi boards as they require SPI0.1 to access the DAC chip. I have found the following boards work with Raspbian. 1 Wire Pi Plus and Zero with OWFS (set the i2c bus to 0 in /etc/owfs.conf) ADC Pi with Python (Works correctly) ADC Differential Pi with Python (Works correctly) Expander Pi with Python (ADC, IO and RTC work but DAC is not available) IO Pi Plus and Zero with Python (Works correctly) I2C Switch with Python (Works correctly but needs sudo to run the python demos) RTC Pi with Python (Works correctly) Servo PWM Pi with Python (Works correctly but needs sudo to run the python demos) I have only tested the boards with Python but our other libraries should work if the I2C bus is set to target I2C 0. It is a shame the SPI port does not work fully but at least most of our boards are working.