Legal Removal Request

Post: Hello Are you using our [url=https://github.com/abelectronicsuk/ABElectronics_dotNetCore_Libraries].net core library[/url] with your C# project? If so then we have two demo files for [url=https://github.com/abelectronicsuk/ABElectronics_dotNetCore_Libraries/blob/master/Demos/IOPi/demo_ioread.cs]reading the status of the ports[/url] on the IO Pi Plus and [url=https://github.com/abelectronicsuk/ABElectronics_dotNetCore_Libraries/blob/master/Demos/IOPi/demo_iowrite.cs]writing values to the outputs[/url] of each port. The code you have posted is setting the ports to be outputs and turning all of the pins to a high state so they will be outputting 5V on each pin. To use the ports as inputs you will need to set the port direction to 0xFF. bus.SetPortDirection(0, 0xFF); To read the value from a port you would use the ReadPort or ReadPin functions. We have a [url=/kb/article/1132/io-pi-plus]series of tutorials in our knowledge base[/url] for the IO Pi Plus. It may be worth reading through the tutorials to get a better understanding of how the IO Pi Plus works. The tutorials use the Python programming language but the principles are the same across all of our supported programming languages. The main difference between our python and .net core C# libraries is the naming convention for the functions. In Python, the functions are lowercase with underscores separating the words while in C# the functions are capitalised with no underscores so the set_pin_direction in Python becomes SetPinDirection in C#.