Legal Removal Request

Post: I am very fueint in C# code however I am having trouble with the ADC PI Plus and the ACS758 sensor.I had this working with an Aruino but have switched to a Raspberry Pi with Windows 10 IOT.The problem I have is that no matter what I do can only return a value of 2.310 plus or minus .010I have the same set up as your example with the ACS712 the only thing that is differant is the ACS758 is a 50 Amp sensor.It seems as if it is reading a differance between inputs but can not confirm that.The arduino code used the raw value then convert to mV then to amps.The sample code for windows 10 IOT just shows how to get the voltage and not the current but my problem is that the voltage reading is alwasy the same even when I apply a 30 Amp or 40 Amp load to thru the sensor.Any help would be great, Thenks