Legal Removal Request

Post: I have tried setting up a new install of Raspbian Jessie on the V1.3 Raspberry Pi Zero and managed to get the serial port working. On a fresh install of Jessie, the serial port is configured as a terminal console so you can use the Serial Pi Plus to access the Linux terminal and configure the Raspberry Pi. To change the default mode to a normal serial port I had to edit [b]/boot/cmdline.txt[/b] and remove the reference to serial1. It looks like in the latest version of Raspbian they have changed the name of the serial port in cmdline.txt from ttyAMA0 to serial1 but if you change the contents of cmdline.txt to be the following it should disable the console support for the serial port. [b]dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait[/b] You will need to reboot for this to work. After rebooting I checked the contents of the /dev folder and there was a reference to ttyAMA0 as shown in the screenshot below. [img]/docs/forumpost/ytijfkq.jpg[/img] I could access the serial port with minicom using the following command. [b]minicom -b 115200 -o -D /dev/ttyAMA0[/b] Hopefully, if you update the cmdline.txt file your serial port should begin working properly.