Legal Removal Request

Post: I tried running your scripts on a Raspberry Pi with two ADC Pi boards and it appears to be reading from both boards correctly. The only change I had to make on my Pi was to change [pre][code]with i2c.I2CMaster() as bus:[/code][/pre] to [pre][code]with i2c.I2CMaster(1) as bus:[/code][/pre] For some reason, quick2wire wouldn't detect the I2C bus my Pi was using and showed an error saying it couldn't find /dev/i2c-0 but once I changed that the script started reading from all 16 channels. It is possible that there is a problem with one of the ADC Pi boards. Can you try testing each board individually, setting them both to have the same I2C addresses? If one board works and the other does not then that would identify the problem board. You could also try using our ADC Pi python library instead of quick2wire and see if that works any better. You can find it on our GitHub repository at [url=https://github.com/abelectronicsuk/ABElectronics_Python_Libraries/tree/master/ADCPi]ADC Pi Python Library[/url]. The code I posted above is designed to work with our ADC Pi library, you will just need to put the [url=https://github.com/abelectronicsuk/ABElectronics_Python_Libraries/blob/master/ADCPi/ADCPi.py]ADCPi.py[/url] library file in the same folder as the script you want to run or install it using the instructions on the GitHub page.