Soldering 8-pin screw terminal
The ADC Pi is an Analogue to Digital converter for the Raspberry Pi
10/09/2018
Posted by:
phoneman
Does it matter which row I use to solder the screw terminal to this board?
10/09/2018
Posted by:
andrew
You need to solder the screw terminals onto the inside row of holes, nearest the chips as these are the ones connected to the ADC inputs. The outside row next to the edge of the board is all connected to ground.
Note: documents in Portable Document Format (PDF) require Adobe Acrobat Reader 5.0 or higher to view.
Download Adobe Acrobat Reader or other PDF reading software for your computer or mobile device.