DXF Files
The IO Pi Plus is a 32 channel MCP23017 GPIO expander for the Raspberry Pi
07/01/2019
Posted by:
BBsay
Does anyone know where I can find the outline profile for the IO Pi Plus board? I want to be able to stack my designs on top of the device. DXF files are preffered since I can import into orcad or altium and make it my board outline.
08/01/2019
Posted by:
andrew
Hello
At the moment we only have a 3d cad model for the IO Pi Plus in STEP format. You can download the file here.
The outline profile for the IO Pi Plus is the same as the official Raspberry Pi hat design. I found this website that has the hat design in DXF format. Hopefully, you can use it for your own design.
At the moment we only have a 3d cad model for the IO Pi Plus in STEP format. You can download the file here.
The outline profile for the IO Pi Plus is the same as the official Raspberry Pi hat design. I found this website that has the hat design in DXF format. Hopefully, you can use it for your own design.
08/01/2019
Posted by:
BBsay
Thank you for the info. I didn't know that they had the same form factor.
08/01/2019
Posted by:
BBsay
Actually, from the looks of it. The IO Pi Plus looks smaller than the raspberry pi. But this will help me get to where I need to be. I can make those changes on Solidworks or Draftsight. Thank you for hte Info.
Note: documents in Portable Document Format (PDF) require Adobe Acrobat Reader 5.0 or higher to view.
Download Adobe Acrobat Reader or other PDF reading software for your computer or mobile device.