Output gain select support in python3 libraries
The ADC-DAC Pi Zero is a 2 Channel ADC and 2 Channel DAC for the Raspberry Pi
15/04/2016
Posted by:
jpsa
The Python3 libraries do not seem to support the 4822 DAC's ×1/×2 output gain select bit (it is apparently supported by the Python2 libraries). I have hacked the code myself to add this support, but it would be nice if this was available out of the box.Cheers,John
15/04/2016
Posted by:
andrew
Hi John
Thank you for spotting the missing code in the Python 3 library.
I have updated the library to support gain selection on the DAC outputs. It now has the same functionality as the python 2 libraries.
Thank you for spotting the missing code in the Python 3 library.
I have updated the library to support gain selection on the DAC outputs. It now has the same functionality as the python 2 libraries.
15/04/2016
Posted by:
jpsa
Thank you!
Note: documents in Portable Document Format (PDF) require Adobe Acrobat Reader 5.0 or higher to view.
Download Adobe Acrobat Reader or other PDF reading software for your computer or mobile device.