IO Pi and IO Pi Plus Support (Page 6)
Support Forum for the IO Pi and IO Pi Plus
The IO Pi Plus from AB Electronics is a digital I/O expansion board designed for the Raspberry Pi. It features 32 digital input/output channels, which are controlled via the I²C bus. The board uses two MCP23017 16-bit I/O expanders, allowing for easy expansion of the Raspberry Pi’s GPIO capabilities.
The board is stackable, meaning multiple boards can be added to a single Raspberry Pi, providing up to 128 I/O ports.
Wiring IO pi with a "standard" I2C device
Posted in IO Pi and IO Pi Plus, last reply 15/05/2018
Replies: 3
Newbie Question
Posted in IO Pi and IO Pi Plus, last reply 09/04/2018
Replies: 1
Install ABElectronics_Python_Libraries in Virtual Environment - not working - IOPi Blink LED
Posted in IO Pi and IO Pi Plus, last reply 01/04/2018
Replies: 4
Orangepi pc plus
Posted in IO Pi and IO Pi Plus, last reply 15/03/2018
Replies: 3
IO Pi Plus programming C error "Failed to write to i2c device for write"
Posted in IO Pi and IO Pi Plus, last reply 07/03/2018
Replies: 5
Turkey Delivery
Posted in IO Pi and IO Pi Plus, last reply 17/01/2018
Replies: 1
IO Pi Plus & Mosquitto MQTT
Posted in IO Pi and IO Pi Plus, last reply 20/12/2017
Replies: 1
IO Pi Zero problems
Posted in IO Pi and IO Pi Plus, last reply 08/11/2017
Replies: 7
"Common" Power Supply for : IO Pi (5V) , RPi (5V) and dc motor (24V)
Posted in IO Pi and IO Pi Plus, last reply 07/11/2017
Replies: 4
"Get" Functions
Posted in IO Pi and IO Pi Plus, last reply 03/11/2017
Replies: 2
GPIO2 & GPIO3
Posted in IO Pi and IO Pi Plus, last reply 31/10/2017
Replies: 1
5V port that can be isolated from the Raspberry Pi via an isolation solder jumper
Posted in IO Pi and IO Pi Plus, last reply 29/10/2017
Replies: 2